NSN 5306-00-349-9516
Wheel Bolt
Between 1.516 inches and 1.562 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number NK3C14-A for national stock number 5306003499516.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-349-9516.
-
MPN or Model
NK3C14-A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.375 inches and 0.453 inches -
Fastener Length
Between 1.516 inches and 1.562 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Locking Feature
Pellet threads -
Thread Diameter
0.190 inches -
Grip Length
Between 1.109 inches and 1.141 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-144-0403 MPN NK500-8-32Socket Head Cap Screw
- 5305-00-297-7490 MPN NK525-10-8Socket Head Cap Screw
- 5305-00-680-7845 MPN S3802Socket Head Cap Screw
- 5305-00-823-5931 MPN M70CR632-7ESetscrew
- 5305-01-308-9109 MPN TM73TI420-5Setscrew
- 5305-01-392-9684 MPN NK515C6R6Machine Screw
- 5305-01-440-9280 MPN NM270CR420K6ESetscrew
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-349-9516 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NK3C14-A | Nylok Corporation |
NK3C14 | Nylok Corporation |
Stock Check
- NS: 2
- NE: 66