NSN 5306-00-360-7999
Wheel Bolt
0.625 inches fastener length, hexagon head style, between 0.181 inches and 0.194 inches head height, width between flats: between 0.428 inches and 0.438 inches .
Manufacturer part number 24325S for national stock number 5306003607999.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-360-7999.
-
MPN or Model
24325S
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.625 inches -
Fastener Length
0.625 inches -
Head Style
Hexagon -
Head Height
Between 0.181 inches and 0.194 inches -
Width Between Flats
Between 0.428 inches and 0.438 inches -
Thread Diameter
0.250 inches -
Features Provided
Unfinished head -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
23.0 rockwell c and 31.0 rockwell c -
Minimum Yield Strength
95000 pounds per square inch -
Material
Steel comp 1035 -
Material Specification
Fed standard 66 federal standard single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-504-3176 MPN 762605Electrical Plug Connector
- 5930-00-898-0500 MPN 8380700Rotary Switch
- 5940-00-919-6494 MPN 10947277Quick Disconnect Terminal
- 5930-01-017-1643 MPN CPR102237Pressure Switch
- 5905-01-079-2862 MPN 12273406-1Nonprecision Nonwire Wound Variable Resistor
- 5935-01-102-7105 MPN 12303861Connector Adapter
- 5930-01-109-6012 MPN 12291167Electrical Switch Retainer
- 5935-01-130-1660 MPN 12311088Receptacle Dummy Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-360-7999 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
24325S | Ford Motor Co |
7375794 | U S Army Tank Automotive Command |
1537405 | General Motors Corp |
638154 | Am General Llc |
1537405 | General Motors Corp |
TP2818 | Atwood Industries Inc |
TP2818 | Dana Commercial Vehicle |
2818 | Eaton Corp |
24325S | Ford Motor Co |