NSN 5306-00-369-5174
Coaxial Connector
Holes 1 and 2 90 degrees apart.
Manufacturer part number 39-25272-1 for national stock number 5306003695174.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-369-5174.
-
MPN or Model
39-25272-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.547 inches and 0.597 inches -
Fastener Length
Between 4.557 inches and 4.587 inches -
Head Style
Dished hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Grip Diameter
Between 0.7480 inches and 0.7490 inches -
Thread Diameter
0.750 inches -
Grip Length
Between 3.990 inches and 4.010 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Bac5771 fscm 81205 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4820-00-228-3360 MPN 35-27275-502Check Valve
- 1560-00-327-0630 MPN 5-87846-2Outboard Carriage Assembly
- 1560-00-607-2101 MPN 3-74929-1Door Rewind Terminal
- 1560-00-704-6790 MPN 36-3686Windless Drag Shaft Assembly
- 1680-00-708-3624 MPN 25-10964-508Sp Stowage Bag Assy
- 1560-00-779-3058 MPN 35-8271-60Cowl Support Angle
- 5985-00-826-1735 MPN 10-30265-502Waveguide Assembly
- 1560-00-862-2179 MPN 34-1194-517Wing Panel Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-369-5174 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
39-25272-1 | The Boeing Company |