NSN 5306-00-370-5520
Coaxial Connector
2.312 inches fastener length, 1.230 inches head diameter, 0.406 inches head height, width between flats: 1.062 inches .
Manufacturer part number 2351679 for national stock number 5306003705520.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-370-5520.
-
MPN or Model
2351679
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
0.562 inches -
Fastener Length
2.312 inches -
Head Diameter
1.230 inches -
Head Height
0.406 inches -
Width Between Flats
1.062 inches -
Grip Diameter
0.7488 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
1.750 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.125 inches first hole -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-122-0797 MPN 5115202-221NAileron Rib
- 1560-00-122-7676 MPN 1116233Aircraft Latch Assembly
- 1560-00-191-1393 MPN 1115188Aircraft Hinge
- 1560-00-717-8159 MPN 2678168Seal Assembly
- 5306-00-660-3408 MPN 2448816Eye Bolt
- 1560-00-046-5520 MPN 5113716-1Aircraft Door
- 1560-00-121-1864 MPN 1203590Aircraft Structural Component Support
- 1560-00-191-1336 MPN 1115371Tailp Link Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-370-5520 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
2351679 | Boeing Company, The |
2351679 | Boeing Company, The |