NSN 5306-00-395-2106
Close Tolerance Hex Head Bolt
Between 1.320 inches and 1.350 inches fastener length, between 0.109 inches and 0.141 inches head height, 0.313 inches width between flats, material specification: ams 5643 assn standard single material response .
Manufacturer part number 880398-1 for national stock number 5306003952106.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-395-2106.
-
MPN or Model
880398-1
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Length
Between 0.480 inches and 0.550 inches -
Fastener Length
Between 1.320 inches and 1.350 inches -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
0.313 inches -
Material Specification
Ams 5643 assn standard single material response
More from these suppliers
- 5935-00-259-3850 MPN 1057919Electrical Receptacle Connector
- 5905-00-685-9608 MPN 300-819459-155Inductive Wire Wound Fixed Resistor
- 5935-00-717-5387 MPN 1048727-1Connector Adapter
- 5940-00-857-3414 MPN 3174162-1Conductor Splice
- 4820-00-866-8107 MPN 361366Valve Seat
- 4820-01-255-9637 MPN 3335459Directional Control Linear Valve Sleeve And Slide
- 5935-01-224-6540 MPN 3320127-8Electrical Plug Connector
- 4920-01-448-9652 MPN 4164003-6Aircraft Maintenance Fixture
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-395-2106 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
880398-1 | Honeywell International Inc. |
880398-1 | Honeywell International Inc. |
880398-1 | M&m Aerospace Hardware Inc. |