NSN 5306-00-409-4360
Coaxial Connector
Between 1.511 inches and 1.541 inches fastener length, hexagon head style, 0.080 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 215-21558-2 for national stock number 5306004094360.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-409-4360.
-
MPN or Model
215-21558-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
0.338 inches -
Fastener Length
Between 1.511 inches and 1.541 inches -
Head Style
Hexagon -
Head Height
0.080 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Thread Diameter
0.190 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-412-2465 MPN 215-20489-3Canopy Bracket
- 1560-00-482-4254 MPN 218-99103-7Aircraft Pylon
- 1560-00-587-9154 MPN CV15-410695-3Left Hand Fitting
- 1560-00-831-1665 MPN CV21-151020-306Ventra Fin Assembly
- 1560-00-852-9157 MPN 215-24808-7Catapult Launch Bar Trunnion
- 5985-01-019-7412 MPN 28-407275Waveguide Assembly
- 1680-01-027-8382 MPN 220-20572-121Cano Latch Assembly
- 1560-01-343-1419 MPN DAA3121D251-001Aircraft Structural Component Support
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-409-4360 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
215-21558-2 | Triumph Aerostructures, Llc |