NSN 5306-00-414-4938
Coaxial Connector
0.784 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 32-32586-3 for national stock number 5306004144938.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-414-4938.
-
MPN or Model
32-32586-3
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.284 inches -
Fastener Length
0.784 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.688 inches first hole -
Material
Steel -
Surface Treatment
Cadmium head -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-009-0895 MPN 53-111010-12Aircraft Former
- 1560-00-012-7552 MPN 32-11023-41Aircraft Skin
- 1680-00-088-7953 MPN 53-79262E222Wire Bundle Assembl
- 1680-00-113-9383 MPN 53-140050-3Pin Pull Shaft
- 1560-00-141-8902 MPN 32-31810-157Airframe Fairing Clip
- 1560-00-144-6826 MPN 32-15031-11Aircraft Access Door
- 1560-00-146-2170 MPN 32-33060-5Aircraft Stringer
- 5985-00-172-6291 MPN 32-87850-75Waveguide Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-414-4938 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
32-32586-3 | Boeing Company, The |