NSN 5306-00-419-3293
Close Tolerance Hex Head Bolt
1.260 inches fastener length, hexagon head style, 0.250 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number 65407-06032-101 for national stock number 5306004193293.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-419-3293.
-
MPN or Model
65407-06032-101
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.822 inches -
Fastener Length
1.260 inches -
Head Style
Hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
Between 0.734 inches and 0.766 inches -
Thread Diameter
0.500 inches -
Grip Length
0.438 inches -
Thready Qty Per Inch (tpi)
20 -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 630 -
Material Specification
Ams 5643 17-4ph assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-065-6228 MPN S6122-82404-3Aircraft Access Cover
- 1560-00-065-7243 MPN 222-222-2Aircraft Structural Component Support
- 1680-00-068-1096 MPN 65503-00003-048Airc Strap Assembly
- 1560-00-113-0200 MPN 65205-08030-042Fuel Tank Skin Assy
- 1680-00-234-2772 MPN S14-40-2156Bell Crank
- 1560-00-591-6592 MPN S1640-61303-5Control Support
- 1560-00-654-3181 MPN S1630-80117Electrical Lead
- 1560-00-700-1971 MPN S6145-61040Resilent Mount Assy
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-419-3293 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65407-06032-101 | Sikorsky Aircraft Corporation |
65407-06032-103 | Sikorsky Aircraft Corporation |
65407-06032-101 | Rotair Industries, Inc. |
65407-06032-101 | Sikorsky Aircraft Corporation |
65407-06032-103 | Sikorsky Aircraft Corporation |
65407-06032-101 | Rotair Industries, Inc. |
65407-06032-101 | Sikorsky Aircraft Corporation |
65407-06032-103 | Sikorsky Aircraft Corporation |
65407-06032-101 | Rotair Industries, Inc. |