NSN 5306-00-420-6471
Coaxial Connector
3.020 inches fastener length, double hexagon w/hole head style, 0.388 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS21250-06038 for national stock number 5306004206471.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-420-6471.
-
MPN or Model
MS21250-06038
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.635 inches and 0.655 inches -
Fastener Length
3.020 inches -
Head Style
Double hexagon w/hole -
Head Height
0.388 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
0.091 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 2.365 inches and 2.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 8740 or steel comp 4140 or steel comp e4340 or steel comp 4340 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-372-9982 MPN ST3M455-3L11-1Close Tolerance Screw
- 5305-01-352-2075 MPN VCL0008-3-6Close Tolerance Screw
- 5306-00-958-9162 MPN VFK100G-06032Shear Bolt
- 5306-01-005-0463 MPN VAL23033-6H8Shear Bolt
- 5306-01-013-8280 MPN STSBG003A04U010Shear Bolt
- 5306-01-104-4832 MPN BACB30MT6T12Shear Bolt
- 5306-01-338-0898 MPN 3M1043-5-18-18Shear Bolt
- 5306-01-350-2241 MPN VCC0090-4-16Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-420-6471 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-06038 | Military Standards |
VFK100G-06038 | Valley-todeco, Inc. |