NSN 5306-00-432-3688
Close Tolerance Hex Head Bolt
Between 1.603 inches and 1.623 inches fastener length, crowned hexagon head style, between 0.157 inches and 0.172 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 106467-5-18 for national stock number 5306004323688.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-432-3688.
-
MPN or Model
106467-5-18
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.311 inches and 0.378 inches -
Fastener Length
Between 1.603 inches and 1.623 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.157 inches and 0.172 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Locking Feature
Detent ball grip -
Grip Diameter
Between 0.3108 inches and 0.3117 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.312 inches -
Grip Length
Between 1.125 inches and 1.141 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.488 inches first hole and 1.518 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Material Specification
Mil-b-83050 military specification single material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-454-0612 MPN CA29040-3-5-8PPanel Screw Assembly
- 5305-01-043-1372 MPN CA2658-4-68Close Tolerance Screw
- 5305-01-465-7817 MPN CA22043-10-0150Panel Screw Assembly
- 5305-01-521-8300 MPN CA2254-4-5Material Aircraft Screw
- 5306-00-006-0662 MPN CA4510-7-113Close Tolerance Bolt
- 5940-01-559-2539 MPN MS27212-2-16Terminal Board
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5305-00-007-2951 MPN NAS1100E01-7Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-432-3688 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-5-18 | Sps Technologies, Llc |
AS194-5-18 | Avibank Mfg., Inc. |
MS27576-5-18 | National Aerospace Standards |
MS27576-5-18 | Military Standards |
CA4510-5-18 | Arconic Global Fasteners & Rings, |