NSN 5306-00-432-3883
Coaxial Connector
Between 1.572 inches and 1.619 inches fastener length, double hexagon head style, 0.210 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number EWSB22-6-19 for national stock number 5306004323883.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-432-3883.
-
MPN or Model
EWSB22-6-19
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 1.572 inches and 1.619 inches -
Head Style
Double hexagon -
Head Height
0.210 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 1.178 inches and 1.198 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.439 inches first hole and 1.471 inches first hole -
Material
Steel -
Material Specification
Sps-m-107, standard pressed steel co mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
56878-ewsb22 manufacturers standard
More from these suppliers
- 5305-00-354-5135 MPN ST3M455-4L12-1Close Tolerance Screw
- 5305-00-508-2707 MPN LS15266V3-15Close Tolerance Screw
- 5305-01-046-2081 MPN ST3M495-6-8Shoulder Screw
- 5305-01-350-6871 MPN VCL0009-6-15Close Tolerance Screw
- 5305-01-435-3883 MPN BACB30LU7-41Close Tolerance Screw
- 5305-01-435-7927 MPN BACB30LU9-31Close Tolerance Screw
- 5306-00-150-3578 MPN VAL22034-7-14Shear Bolt
- 5306-01-045-2874 MPN VAL23608-6D16Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-432-3883 shear boltManufacturer Part Numbers and Alternates
| MPN manufacturer part number | Registrant or Supplier |
|---|---|
| EWSB22-6-19 | Sps Technologies, Llc |
| GB511B6D19 | Northrop Grumman Systems Corporation |
| VAL22034-6FS19 | Valley-todeco, Inc. |
| VAL22034-6GS19 | Valley-todeco, Inc. |
| AIC516B6D19 | Sps Technologies, Llc |
| BM17020-6-19 | Huck International, Inc. |
| H401-6D19 | Huck International, Inc. |
| EWSB22D6-19 | Sps Technologies, Llc |
| EWSB22D6-19 | Sps Technologies, Llc |
| VS3071-6F19D | Alcoa Global Fasteners, Inc. |
| EWSB22-6-19 | Sps Technologies, Llc |
| C699-6-19 | Sps Technologies, Llc |
| C699-6-19 | Sps Technologies, Llc |
| C699-6-19 | Alcoa Global Fasteners, Inc. |
| C699-6-19 | Lockheed Martin Corporation |
Stock Check
