NSN 5306-00-433-9079
Wheel Bolt
1.875 inches fastener length, hexagon head style, 0.156 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number MS9490-27 for national stock number 5306004339079.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-433-9079.
-
MPN or Model
MS9490-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.810 inches -
Fastener Length
1.875 inches -
Head Style
Hexagon -
Head Height
0.156 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.065 inches and 1.125 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-00-031-4557 MPN MS75084-12Radio Frequency Coil
- 5935-00-043-1332 MPN CA3106E32A-10PElectrical Plug Connector
- 5935-00-084-9819 MPN MS24264R14B15PNXElectrical Receptacle Connector
- 5935-00-103-7476 MPN MS27497REB18-32PElectrical Receptacle Connector
- 5935-00-105-1823 MPN MS24264G14T4SXLEVELXElectrical Receptacle Connector
- 5935-00-109-0217 MPN MS3106R18-20PElectrical Plug Connector
- 5935-00-122-3399 MPN MS3116F16-26SXElectrical Plug Connector
- 5935-00-164-1770 MPN MS3416-36GNElectrical Connector Backshell
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-433-9079 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9490-27 | Military Standards |