NSN 5306-00-434-0150
Coaxial Connector
Between 1.210 inches and 1.240 inches fastener length, double hexagon extended washer head style, between 0.293 inches and 0.313 inches head height, width between flats: 0.313 inches .
Manufacturer part number 9138M18P01 for national stock number 5306004340150.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-434-0150.
-
MPN or Model
9138M18P01
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.560 inches and 0.610 inches -
Fastener Length
Between 1.210 inches and 1.240 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.293 inches and 0.313 inches -
Width Between Flats
0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.448 inches -
Extended Washer Thickness
0.060 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Single Shear Strength
3195 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
Between 0.630 inches and 0.650 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Nickel alloy -
Material Specification
C50tf13 cl b fscm 07482 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-126-5926 MPN R984P4781AInductive Wire Wound Fixed Resistor
- 4920-00-488-1213 MPN 21C5266F01Turbine Rotor Cover
- 4920-00-574-1497 MPN 21C3622G001Aircraft Maintenance Fixture
- 4920-00-824-1340 MPN 1C3992-1G1Pressure Test Clamp
- 5930-01-034-1709 MPN L25022P04Rotary Switch Section
- 4920-01-094-6403 MPN 21C8035G03Drive Shaft Wrench
- 4920-01-153-0987 MPN 3C3156G01Aircraft Pneumatic System Components Test Station
- 4920-01-153-2001 MPN 3C3158G01Aircraft Components Test Set Subassembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-434-0150 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
9138M18P01 | General Electric Company |