NSN 5306-00-453-4756
Coaxial Connector
Between 3.560 inches and 3.590 inches fastener length, double hexagon head style, 0.328 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number 69341-09-2975 for national stock number 5306004534756.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-453-4756.
-
MPN or Model
69341-09-2975
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.575 inches and 0.625 inches -
Fastener Length
Between 3.560 inches and 3.590 inches -
Head Style
Double hexagon -
Head Height
0.328 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.562 inches -
Grip Length
Between 2.965 inches and 2.985 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Hardness Rating
51.0 rockwell c and 54.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.421 inches first hole -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium -
Surface Treatment Specification
Ams 2416 assn standard all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-067-7810 MPN SFH22D6A13Machine Screw
- 5305-00-257-5585 MPN 106678-25Setscrew
- 5305-00-357-1869 MPN ST3M466V4L7-1Close Tolerance Screw
- 5305-00-505-3444 MPN LS15237C3-4Close Tolerance Screw
- 5305-00-900-4403 MPN 57999-1Socket Head Cap Screw
- 5305-01-004-8712 MPN NAS1189-4P7LSocket Head Cap Screw
- 5305-01-015-8725 MPN 38030-98C10DSocket Head Cap Screw
- 5305-01-023-9050 MPN NAS1191-02T3BSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-453-4756 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
69341-09-2975 | Sps Technologies, Llc |
69341-09-2975 | Sps Technologies, Llc |