NSN 5306-00-456-3152
Wheel Bolt
Between 1.615 inches and 1.635 inches fastener length, double hexagon w/hole head style, between 0.412 inches and 0.432 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number R586P23U for national stock number 5306004563152.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-456-3152.
-
MPN or Model
R586P23U
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.990 inches and 1.070 inches -
Fastener Length
Between 1.615 inches and 1.635 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.412 inches and 0.432 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Extended Washer Diameter
Between 0.552 inches and 0.572 inches -
Extended Washer Thickness
Between 0.090 inches and 0.100 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.565 inches and 0.625 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
63.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Inconel 718, fscm 74900 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 4920-00-052-3230 MPN 518D595G1Electrical Special Purpose Cable Assembly
- 5905-00-126-5917 MPN R984P4421AInductive Wire Wound Fixed Resistor
- 4920-00-575-7238 MPN 21C3629G001Check Valve And Holding Fixture
- 5905-00-792-5994 MPN R999P0910AInductive Wire Wound Fixed Resistor
- 4920-00-858-7534 MPN 1C2994G1Flight Line Tester
- 4920-01-003-4645 MPN 518D767G1Cable Assembly
- 4920-01-005-3767 MPN 21C6132Dummy Seal Runner
- 4920-01-006-0025 MPN 21C4325G01Tie Bolt Fixture
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-456-3152 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R586P23U | General Electric Company |
R586P23U | General Electric Company |