NSN 5306-00-456-7835
Coaxial Connector
2.790 inches fastener length, round w/wrench flats chamfered head style, 0.650 inches head diameter, head height: 0.130 inches .
Manufacturer part number 4J13320-701A for national stock number 5306004567835.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-456-7835.
-
MPN or Model
4J13320-701A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
2.790 inches -
Head Style
Round w/wrench flats chamfered -
Head Diameter
0.650 inches -
Head Height
0.130 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Shank Unthreaded Hole Diameter
0.108 inches first hole and 0.113 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
2.290 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.670 inches first hole -
Material
Steel -
Material Specification
Ams 6427 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-015-4872 MPN 3W23301-101Flap Panel Assembly
- 5930-00-024-4237 MPN 459339Switch Actuator Arm
- 1560-00-027-9568 MPN 3C24977-118S Actuator Quadrant
- 1680-00-034-7178 MPN 4C95016-167BSupport Bearing Ass
- 1680-00-079-0774 MPN 367942-3Radome And Lightnin
- 1560-00-107-2466 MPN 3E41096-113Trim Panel
- 1560-00-115-1136 MPN 383156-31Tank Tiedown Strap
- 4920-00-118-6874 MPN 4S94194-101ATest Adapter Kit
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-456-7835 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
4J13320-701A | Lockheed Martin Corporation |