NSN 5306-00-458-1639
Coaxial Connector
Between 1.078 inches and 1.125 inches fastener length, double hexagon head style, 0.140 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 70467-3D9 for national stock number 5306004581639.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-458-1639.
-
MPN or Model
70467-3D9
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.505 inches and 0.572 inches -
Fastener Length
Between 1.078 inches and 1.125 inches -
Head Style
Double hexagon -
Head Height
0.140 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches and 0.075 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
Between 0.553 inches and 0.573 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 44.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.813 inches and 0.845 inches first hole -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Iron alloy 660 -
Material Specification
Ams 5732 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5305-00-151-5793 MPN NAS1133-9Close Tolerance Screw
- 5305-00-178-8215 MPN 38038E-98C-6DScrew
- 5305-00-224-0565 MPN NAS1101-02-10Machine Screw
- 5305-00-753-4305 MPN 38030-3F8CSocket Head Cap Screw
- 5305-00-810-1266 MPN 51B334-40HClose Tolerance Screw
- 5305-01-007-7042 MPN CVC241-3-5Machine Screw
- 5305-01-014-8313 MPN NAS1101E04-5Machine Screw
- 5305-01-025-6964 MPN HT4017-08-7Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-458-1639 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
70467-3D9 | Sps Technologies, Llc |
70467-3D9 | Sps Technologies, Llc |