NSN 5306-00-460-8547
Close Tolerance Hex Head Bolt
W/retaining element on shank.
Manufacturer part number 106467-4-22 for national stock number 5306004608547.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-460-8547.
-
MPN or Model
106467-4-22
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.342 inches and 0.393 inches -
Fastener Length
Between 1.853 inches and 1.873 inches -
Head Style
Crowned hexagon -
Head Height
Between 0.126 inches and 0.141 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2483 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.375 inches and 1.391 inches -
Thready Qty Per Inch (tpi)
28 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.753 inches first hole and 1.783 inches first hole -
Surface Finish
63.0 microinches grip -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-115-7667 MPN SRS215-20421-15Support Assembly
- 5305-00-638-3477 MPN 00183Machine Screw
- 5305-01-273-6846 MPN LL-HX5-4733Socket Head Cap Screw
- 5305-01-386-5277 MPN 02270-2Shoulder Screw
- 5305-01-598-6035 MPN 03360-01Socket Head Cap Screw
- 5320-01-317-4065 MPN PO0294NRPTubular Rivet
- 5305-00-842-1590 MPN CA2730-4-33Close Tolerance Screw
- 1680-00-525-4452 MPN NAS25-3KRTank Strap Trunnion
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-460-8547 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
106467-4-22 | Sps Technologies, Llc |
AS194-4-22 | Avibank Mfg., Inc. |
CIPRD-MS27576-4-22R | Defense Logistics Agency |
MS27576-4-22 | National Aerospace Standards |
MS27576-4-22 | Military Standards |
CA4510-4-22 | Arconic Global Fasteners & Rings, |