NSN 5306-00-460-8549
Close Tolerance Hex Head Bolt
W/retaining element on shank.
Manufacturer part number MS27576-8-65 for national stock number 5306004608549.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-460-8549.
-
MPN or Model
MS27576-8-65
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.3 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.401 inches and 0.546 inches -
Fastener Length
Between 4.708 inches and 4.728 inches -
Head Style
Dished hexagon -
Head Height
Between 0.251 inches and 0.266 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.500 inches -
Grip Length
Between 4.062 inches and 4.078 inches -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
4.458 inches first hole and 4.618 inches first hole -
Surface Finish
63.0 microinches grip -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, cl 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-918-4921 MPN CA28080-06-6SPanel Screw Assembly
- 5305-01-012-3347 MPN CA3018-10PPanel Screw Assembly
- 5306-01-567-9469 MPN CA22072-4-10-17Internal Wrenching Bolt
- 5320-01-462-5210 MPN CA21367-4TSPin-rivet
- 5940-01-425-6513 MPN NAS1063A5-446Terminal Board Marker Strip
- 5940-01-451-4412 MPN NAS1063A3-504AHTerminal Board Marker Strip
- 5305-00-004-5186 MPN NAS1102-4-40Machine Screw
- 5305-00-035-5383 MPN NAS1581A3H13TClose Tolerance Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-460-8549 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS27576-8-65 | National Aerospace Standards |
MS27576-8-65 | Military Standards |
CA4510-8-65 | Arconic Global Fasteners & Rings, |
106467-8-65 | Sps Technologies, Llc |