NSN 5306-00-463-0204
Coaxial Connector
Between 6.078 inches and 6.125 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number NAS464-4-92 for national stock number 5306004630204.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-463-0204.
-
MPN or Model
NAS464-4-92
-
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Length
Between 0.328 inches and 0.375 inches -
Fastener Length
Between 6.078 inches and 6.125 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Grip Diameter
Between 0.2487 inches and 0.2492 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole -
Single Shear Strength
4650 pounds per square inch -
Thread Diameter
0.250 inches -
Grip Length
5.750 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
5.922 inches first hole and 5.954 inches first hole -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-972-8484 MPN NAS715-11BElectrical Receptacle Connector
- 5305-00-008-5827 MPN NAS1100E08-15Machine Screw
- 5305-00-050-9222 MPN MS24667-42Socket Head Cap Screw
- 5305-00-052-6867 MPN MS24627-37Tapping Screw
- 5305-00-058-4019 MPN MS24694S121Machine Screw
- 5305-00-089-0269 MPN NAS1352-04-6PSocket Head Cap Screw
- 5305-00-143-9672 MPN NAS1351C3H12PSocket Head Cap Screw
- 5305-00-144-0420 MPN MS35191-349Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-463-0204 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS464-4-92 | National Aerospace Standards |