NSN 5306-00-466-0740
Close Tolerance Hex Head Bolt
Between 1.335 inches and 1.382 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 68484-5A16 for national stock number 5306004660740.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-466-0740.
-
MPN or Model
68484-5A16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.335 inches and 0.382 inches -
Fastener Length
Between 1.335 inches and 1.382 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
End Application
Aircraft c-5, c-141, s-3b -
Thread Diameter
0.312 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel -
Material Specification
H-11, sts bs000, fscm 98897 mfr ref single material response -
Surface Treatment
Nickel and chromate -
Surface Treatment Specification
Stsbs000, fscm 98897 mfr ref all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-056-5452 MPN BACB30LU5-4Close Tolerance Screw
- 5305-01-355-6951 MPN VCL0009-7D26Close Tolerance Screw
- 5305-01-365-1199 MPN BACB30NN6K44Close Tolerance Screw
- 5305-01-417-2490 MPN 3M1169V-3-14AClose Tolerance Screw
- 5306-00-514-4840 MPN MS21250-06058Shear Bolt
- 5306-01-131-8458 MPN VAL22034-6F8Shear Bolt
- 5306-01-142-2899 MPN VAL23608-4-46Shoulder Bolt
- 5306-01-142-7177 MPN VAL23607-6-1Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-466-0740 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68484-5A16 | Sps Technologies, Llc |
BM3200-5A016 | Huck International, Inc. |
VAL23611-5D016 | Valley-todeco, Inc. |
AIC2263A05U016 | Sps Technologies, Llc |
PBF1041A5U016 | Sps Technologies, Llc |
VS2978A05U016 | Arconic Global Fasteners & Rings, |
STSBG000A05U016 | Sps Technologies, Llc |
11797A05U016 | Reid Products Inc. |
STSBG000A05U016 | Lockheed Martin Corporation |
BM3200-5A016 | Huck Intl Inc |
VS2978A05U016 | Alcoa Global Fasteners, Inc. |
68484-5A16 | Sps Technologies, Llc |