NSN 5306-00-466-9959
Coaxial Connector
3.625 inches fastener length, double hexagon extended washer head style, 0.618 inches head height, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number A422184-2 for national stock number 5306004669959.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-466-9959.
-
MPN or Model
A422184-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.000 inches -
Fastener Length
3.625 inches -
Head Style
Double hexagon extended washer -
Head Height
0.618 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Extended Washer Diameter
Between 1.040 inches and 1.050 inches -
Extended Washer Thickness
0.150 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
2.625 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c -
Material
Steel -
Material Specification
Ams5844 assn standard single material response -
Surface Treatment
Passivate and silver -
Surface Treatment Specification
Qq-p-35, type 1 federal specification 1st treatment response and ams2410 assn standard 2nd treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-01-012-1282 MPN 622757-11Electrical Receptacle Connector
- 5935-01-149-0749 MPN 521969-1Plug-in Electronic Components Socket
- 5935-01-288-7023 MPN 6532C818-3Clamp Assembly Bar
- 6110-01-489-1484 MPN 212775-3Electrical System Protection Panel
- 5305-00-151-9508 MPN REI-02-12120Socket Head Cap Screw
- 5305-00-172-6790 MPN 323858-2Setscrew
- 6105-01-113-3162 MPN 611715-4Motor Unit Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-466-9959 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A422184-2 | Naval Air Warfare Center Aircraft |
A422184-2 | Naval Air Warfare Center Aircraft |
A422184-2 | Naval Air Warfare Center Aircraft |
A422184-2 | Naval Air Warfare Center Aircraft |
A422184-2 | Naval Air Warfare Center Aircraft |
A422184-2 | Naval Air Warfare Center Aircraft |
A422184-2 | Naval Air Warfare Center Aircraft |
A422184-2 | Naval Air Warfare Center Aircraft |
A422184-2 | Naval Air Warfare Center Aircraft |
A422184-2 | Naval Air Warfare Center Aircraft |