NSN 5306-00-467-0869
Coaxial Connector
Between 1.901 inches and 1.931 inches fastener length, dished hexagon head style, between 0.219 inches and 0.234 inches head height, width between flats: between 0.679 inches and 0.690 inches .
Manufacturer part number BACB30NF7-22 for national stock number 5306004670869.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-467-0869.
-
MPN or Model
BACB30NF7-22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.516 inches and 0.566 inches -
Fastener Length
Between 1.901 inches and 1.931 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Material Specification
Mil-s-5000 military specification single material response or mil-s-6049 military specification single material response or ams 6322 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416 type 2 cl 3 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-064-9207 MPN 114P8049-1Access Arm Assembly
- 1560-00-084-6729 MPN 69-21080-3Aileron Balance Weight
- 5935-00-258-8140 MPN ZB1-3849Connector Adapter
- 5905-00-329-5320 MPN BACR14CHSR000CFInductive Wire Wound Fixed Resistor
- 1560-00-331-4830 MPN 3-93580Aircraft Structural Plate
- 1560-00-340-5989 MPN 60-2613Door Latch Guide Block
- 1560-00-512-0735 MPN 10-1389-25Aircraft Windshield Panel
- 4920-00-601-6927 MPN F71213-37Fuel Ta Plate Cover
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-467-0869 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NF7-22 | The Boeing Company |
BACB30NF7-22 | The Boeing Company |