NSN 5306-00-469-1960
Close Tolerance Hex Head Bolt
Identification disk on top of head 0.430 in. Dia,0.030 in. Depth.
Manufacturer part number A111-9E for national stock number 5306004691960.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-469-1960.
-
MPN or Model
A111-9E
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.499 inches and 0.640 inches -
Fastener Length
Between 1.500 inches and 1.540 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.150 inches -
Width Between Flats
Between 0.431 inches and 0.438 inches -
Grip Diameter
Between 0.2493 inches and 0.2498 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.900 inches and 1.001 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel -
Material Specification
A.111, fscm k7766 national specification single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5940-00-113-3145 MPN SAE AS7928Lug Terminal
- 5935-00-578-3512 MPN AS50151Electrical Plug Connector
- 5935-01-176-1627 MPN MS3456W20-2SElectrical Plug Connector
- 5935-01-201-4467 MPN SAE-AS85049/49Electrical Connector Cable Clamp
- 5935-01-255-5325 MPN SAE AS85049/7Electrical Connector Backshell
- 5935-01-261-9376 MPN AS50151Electrical Plug Connector
- 5935-01-263-0335 MPN AS50151Electrical Receptacle Connector
- 5935-01-312-4658 MPN M85049/1823W06AElectrical Connector Backshell
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-469-1960 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A111-9E | British Standards Institution |
A111-9E | Society Of British Aerospace Compani |
99-9415870 | Nato Stock Number Assigned |
A111-9E | Sae International |