NSN 5306-00-469-1989
Close Tolerance Hex Head Bolt
Extended dia 0.550 in. W,0.030 in. H on top of head.
Manufacturer part number A111-21J for national stock number 5306004691989.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-469-1989.
-
MPN or Model
A111-21J
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
Between 0.637 inches and 0.707 inches -
Fastener Length
Between 2.850 inches and 2.890 inches -
Head Style
Hexagon -
Head Height
Between 0.210 inches and 0.220 inches -
Width Between Flats
Between 0.554 inches and 0.562 inches -
Grip Diameter
Between 0.3743 inches and 0.3748 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 2.183 inches and 2.213 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-539-0738 MPN AS50151Electrical Plug Connector
- 5940-00-813-0698 MPN MS25036-101Lug Terminal
- 5935-00-947-8160 MPN MS3147E7-50SElectrical Plug Connector
- 5935-01-096-0830 MPN MS3408D40-9SElectrical Plug Connector
- 5930-01-106-3948 MPN SAE-AS55941/6Toggle Switch
- 5935-01-110-1942 MPN AS50151Electrical Receptacle Connector
- 5935-01-122-7240 MPN MS3402D14S-7PXElectrical Receptacle Connector
- 5935-01-184-3332 MPN M85049/74-16-2Electrical Connector Potting Mold
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-469-1989 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
A111-21J | British Standards Institution |
A111-21J | Society Of British Aerospace Compani |
99-9415937 | Nato Stock Number Assigned |
A111-21J | Sae International |