NSN 5306-00-472-2707
Coaxial Connector
Furnished w/one ea bushing and washer.
Manufacturer part number 209-031-345-1 for national stock number 5306004722707.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-472-2707.
-
MPN or Model
209-031-345-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.6 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.563 inches -
Fastener Length
Between 3.234 inches and 3.281 inches -
Head Style
Hexagon -
Head Height
Between 0.359 inches and 0.391 inches -
Width Between Flats
Between 1.052 inches and 1.065 inches -
Grip Diameter
Between 0.7481 inches and 0.7488 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Single Shear Strength
41950 pounds per square inch -
Thread Diameter
0.750 inches -
Grip Length
2.687 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.046 inches first hole and 3.078 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 or steel comp 4037 -
Thread Series Designator
Unjf
More from these suppliers
- 1560-00-135-0585 MPN 209-075-264-11Stowag Bracket Assy
- 5935-00-137-0549 MPN 30-091-1Electrical Plug Connector
- 1560-00-409-9633 MPN 209-070-181-9Panel Assembly
- 1560-00-413-1391 MPN 205-030-245-13Po Upper Hinge Half
- 1560-00-426-1258 MPN 205-032-800-13SBoom Stringer
- 1560-00-461-4365 MPN 205-030-872-47Aircraft Access Cover
- 1560-00-486-8666 MPN 209-070-720-LHArmor Panel
- 1560-00-599-2881 MPN 212-061-201-009Ejector Assembly
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-472-2707 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
209-031-345-1 | Bell Helicopter Textron Inc. |