NSN 5306-00-472-5238
Shouldered Rivet Ring Bolt
About this product
Between 0.500 inches and 0.503 inches eye inside diameter, 0.125 inches shoulder thickness, between 1.140 inches and 1.187 inches shank length, eye stock thickness: between 0.370 inches and 0.380 inches .
Manufacturer part number AN49C10A for national stock number 5306004725238.
Datasheet
-
Product description
Eye Bolt NSN 5306-00-472-5238.
-
MPN or Model
AN49C10A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.890 inches and 0.937 inches -
Eye Inside Diameter
Between 0.500 inches and 0.503 inches -
Shoulder Thickness
0.125 inches -
Shank Length
Between 1.140 inches and 1.187 inches -
Eye Stock Thickness
Between 0.370 inches and 0.380 inches -
Shoulder Diameter
1.188 inches -
Overall Length
Between 2.749 inches and 2.796 inches -
Thread Diameter
0.562 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
0.938 inches -
Eye Outside Width
1.188 inches -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp 431 -
Material Specification
Mil-s-18732 military specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Mil-b-6812 military specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 1680-01-571-7708 MPN 10367-A-1032-17Controller Handle
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5940-01-384-3955 MPN NAS1063A20TB42CTerminal Board Marker Strip
- 5305-00-007-1589 MPN NAS1102E02-7PMachine Screw
- 5305-00-008-5885 MPN NAS1102E06-7PMachine Screw
- 5305-00-008-5891 MPN NAS1102E08-18Machine Screw
- 5305-00-008-5908 MPN NAS1189E04T4LSocket Head Cap Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-00-472-5238 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN49C10A | National Aerospace Standards |
AN49C10A | Aeronautical Standards Group |
AN49C10A | Aeronautical Standards Group |
Stock Check
Availability of this NSN has not been updated recently. Submit
the pricing and availbility form above to receive an up to date quote.