NSN 5306-00-477-0129
Coaxial Connector
Between 2.397 inches and 2.427 inches fastener length, double hexagon w/hole head style, between 2.990 inches and 3.010 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number VS2201F4-32 for national stock number 5306004770129.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-477-0129.
-
MPN or Model
VS2201F4-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.387 inches and 0.437 inches -
Fastener Length
Between 2.397 inches and 2.427 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 2.990 inches and 3.010 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
Between 0.059 inches and 0.079 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 1.990 inches and 2.010 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel comp h11 -
Material Specification
Ams6485 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-802-6796 MPN 358167Machine Screw
- 5305-00-807-3928 MPN AIC4043-04-05Machine Screw
- 5305-01-158-5371 MPN AIC940-3-9Machine Screw
- 5305-01-234-2565 MPN LD111-0044-2416Close Tolerance Screw
- 5305-01-327-5692 MPN AIC4410-4-7AClose Tolerance Screw
- 5305-01-462-1653 MPN AIC9535-8-11Close Tolerance Screw
- 5305-01-481-8561 MPN AIC4463-06-7Machine Screw
- 5305-01-591-8597 MPN 120-276V3T17Assembled Washer Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-477-0129 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2201F4-32 | Arconic Global Fasteners & Rings, |
AIC220EL4-32 | Sps Technologies, Llc |
LWB22-4-32 | Sps Technologies, Llc |
C083-4-32 | Lockheed Martin Corporation |
VS2201F4-32 | Alcoa Global Fasteners, Inc. |
LWB22-4-32 | Sps Technologies, Llc |