NSN 5306-00-481-0111
Wheel Bolt
2.250 inches fastener length, hexagon head style, 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number MS9783-32 for national stock number 5306004810111.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-481-0111.
-
MPN or Model
MS9783-32
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.630 inches and 0.690 inches -
Fastener Length
2.250 inches -
Head Style
Hexagon -
Head Height
0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 1.560 inches and 1.620 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Hardness Rating
32.0 rockwell c and 38.0 rockwell c -
Minimum Yield Strength
120000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Steel comp 630 -
Material Specification
Ams 5643 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-009-6400 MPN MS24266Electrical Plug Connector
- 5940-00-082-4642 MPN MS18029-11S-20Terminal Board Cover
- 5930-00-137-8573 MPN MS25089-1H-1Push-pull Switch
- 5935-00-149-3340 MPN MS3102A20-7SElectrical Receptacle Connector
- 5935-00-177-2086 MPN MS24264G18T31PNXElectrical Receptacle Connector
- 5935-00-189-2329 MPN MS27506A1411-2Electrical Plug Connector
- 5935-00-204-8093 MPN MS3106E12S3PElectrical Plug Connector
- 5935-00-259-0613 MPN MS3102A32-5PElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-481-0111 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9783-32 | Military Standards |