NSN 5306-00-482-4598
Wheel Bolt
0.625 inches fastener length, double hexagon w/hole head style, 0.330 inches head height, width between flats: between 0.304 inches and 0.313 inches .
Manufacturer part number MS21289-08 for national stock number 5306004824598.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-482-4598.
-
MPN or Model
MS21289-08
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.554 inches and 0.625 inches -
Fastener Length
0.625 inches -
Head Style
Double hexagon w/hole -
Head Height
0.330 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
0.438 inches -
Extended Washer Thickness
Between 0.060 inches and 0.070 inches -
Hole Diameter
0.070 inches -
Thread Diameter
0.250 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Hole Configuration Style
Hexagon flats -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams 5735 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-00-035-4420 MPN MS75085-1Radio Frequency Coil
- 5935-00-050-7031 MPN MS24264R16T24P7Electrical Receptacle Connector
- 5940-00-114-1306 MPN MS25036-117Lug Terminal
- 5935-00-126-1756 MPN MS3111P8-3SElectrical Plug Connector
- 5940-00-132-2772 MPN MS27212-1-7Terminal Board
- 5905-00-141-1118 MPN MS35043-53Composition Fixed Resistor
- 5935-00-153-5786 MPN MS27484T18B32SAElectrical Plug Connector
- 5935-00-153-7457 MPN MS3416-10GNElectrical Connector Backshell
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-482-4598 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21289-08 | Military Standards |