NSN 5306-00-484-5514
Wheel Bolt
Between 1.365 inches and 1.385 inches fastener length, double hexagon extended washer head style, between 0.365 inches and 0.385 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number R107P14N for national stock number 5306004845514.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-484-5514.
-
MPN or Model
R107P14N
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
1a -
Thread Direction
Right-hand -
Thread Length
Between 0.865 inches and 0.945 inches -
Fastener Length
Between 1.365 inches and 1.385 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.365 inches and 0.385 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Extended Washer Diameter
Between 0.490 inches and 0.510 inches -
Extended Washer Thickness
Between 0.070 inches and 0.080 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.440 inches and 0.500 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
63.0 microinches grip -
Material
Steel -
Surface Treatment
Nickel -
Surface Treatment Specification
Qq-n-290 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4920-00-124-9639 MPN 21C3736G01Aircraft Maintenance Fixture
- 4920-00-193-9733 MPN 9408M31G02Turbine Stator Vanes Container
- 4920-00-535-1061 MPN 1C2284Aircraft Maintenance Alignment Jig
- 4920-00-570-8738 MPN 5793105-21G1Special Cable Assy
- 5935-00-721-0917 MPN 21C1546-177Electrical Connector Cover
- 4920-01-063-5555 MPN 21C9504G02Hydraulic System Components Test Stand
- 5905-01-249-4686 MPN J350Inductive Wire Wound Fixed Resistor
- 4820-01-323-3462 MPN 1472M72G01Directional Control Linear Valve Sleeve And Slide
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-484-5514 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
R107P14N | General Electric Company |