NSN 5306-00-485-2412
Wheel Bolt
Between 2.740 inches and 2.760 inches fastener length, crowned hexagon head style, 0.141 inches head height, width between flats: between 0.428 inches and 0.440 inches .
Manufacturer part number 4G53854-101A for national stock number 5306004852412.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-485-2412.
-
MPN or Model
4G53854-101A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 2.669 inches and 2.760 inches -
Fastener Length
Between 2.740 inches and 2.760 inches -
Head Style
Crowned hexagon -
Head Height
0.141 inches -
Width Between Flats
Between 0.428 inches and 0.440 inches -
Shank Unthreaded Hole Diameter
0.056 inches first hole -
Thread Diameter
0.250 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.360 inches first hole and 2.380 inches first hole -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-012-8136 MPN 3W12040-102Aircraft Structural Panel
- 1560-00-047-3930 MPN 175857-2Aircraft Structural Component Support
- 5930-00-068-7936 MPN 644792-105Thermostatic Switch
- 5985-00-093-6653 MPN 140772Antenna Support Base
- 1560-00-096-4918 MPN 344009Outer Wing Fitting
- 1560-00-097-6169 MPN 397819-1Exhaust Muffler
- 4920-00-105-6958 MPN 4S90544-101AAircraft Maintenance Fixture
- 1560-00-109-7871 MPN 20-177250Airc Stabilizer Tip
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-485-2412 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
4G53854-101A | Lockheed Martin Corporation |