NSN 5306-00-486-5619
Close Tolerance Hex Head Bolt
Between 1.935 inches and 1.955 inches fastener length, dished hexagon head style, between 0.095 inches and 0.110 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number 06467-3-25 for national stock number 5306004865619.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-486-5619.
-
MPN or Model
06467-3-25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.237 inches and 0.319 inches -
Fastener Length
Between 1.935 inches and 1.955 inches -
Head Style
Dished hexagon -
Head Height
Between 0.095 inches and 0.110 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Locking Feature
Detent ring grip -
Grip Diameter
Between 0.1885 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole and 0.080 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
Between 1.562 inches and 1.578 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
95000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 41.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
0.842 inches first hole and 0.872 inches first hole -
Surface Finish
63.0 microinches grip -
Material
Steel comp e4340 or steel comp 4140 or steel comp 8740 or steel comp 4130 or steel comp 6150 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-856-9460 MPN 9976493Machine Screw
- 5305-01-129-6190 MPN CA28066Panel Screw Assembly
- 5940-01-413-3019 MPN NAS1063B75-91Terminal Board Marker Strip
- 5305-00-052-7450 MPN MS35198-98Machine Screw
- 5305-00-052-7451 MPN MS35198-99Machine Screw
- 5305-00-057-0491 MPN MILS7839Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-099-7663 MPN NAS1221-3C5PMachine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-486-5619 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
06467-3-25 | Minimatic Components |
AS194-3-25 | Avibank Mfg., Inc. |
MS27576-3-25 | National Aerospace Standards |
MS27576-3-25 | Military Standards |
CA4510-3-25 | Arconic Global Fasteners & Rings, |