NSN 5306-00-487-4736
Coaxial Connector
Between 1.322 inches and 1.369 inches fastener length, double hexagon head style, 0.210 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number VS2521-6F15 for national stock number 5306004874736.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-487-4736.
-
MPN or Model
VS2521-6F15
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.374 inches and 0.441 inches -
Fastener Length
Between 1.322 inches and 1.369 inches -
Head Style
Double hexagon -
Head Height
0.210 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.3733 inches and 0.3742 inches -
Thread Diameter
0.375 inches -
Grip Length
Between 0.928 inches and 0.948 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel -
Material Specification
M-107, standard pressed steel co mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
56878-ewsb22 manufacturers standard
More from these suppliers
- 5305-00-040-9687 MPN NAS1102-08-8BMachine Screw
- 5305-00-310-5360 MPN AIC811-08-9Socket Head Cap Screw
- 5305-00-316-8110 MPN AIC818-06-4CSocket Head Cap Screw
- 5305-00-802-8882 MPN 362954Machine Screw
- 5305-00-915-4767 MPN A1C792-4-3Machine Screw
- 5305-01-004-9528 MPN ST3M557-3-3Close Tolerance Screw
- 5305-01-258-9110 MPN 51B334-11XClose Tolerance Screw
- 5305-01-329-7807 MPN AIC4414-3-26Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-487-4736 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VS2521-6F15 | Arconic Global Fasteners & Rings, |
AIC220-6A15 | Sps Technologies, Llc |
EWSB22-6A15 | Sps Technologies, Llc |
C081-6-15 | Lockheed Martin Corporation |
EWSB22-6A15 | Sps Technologies, Llc |
VS2521-6F15 | Alcoa Global Fasteners, Inc. |