NSN 5306-00-487-4740
Coaxial Connector
Between 1.491 inches and 1.538 inches fastener length, double hexagon head style, 0.350 inches head height, width between flats: between 0.928 inches and 0.940 inches .
Manufacturer part number AIC220-10A14 for national stock number 5306004874740.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-487-4740.
-
MPN or Model
AIC220-10A14
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.606 inches and 0.673 inches -
Fastener Length
Between 1.491 inches and 1.538 inches -
Head Style
Double hexagon -
Head Height
0.350 inches -
Width Between Flats
Between 0.928 inches and 0.940 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 0.865 inches and 0.885 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel -
Material Specification
M-107, standard pressed steel co mfr ref single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Nas 672 assn standard single treatment response -
Thread Series Designator
Unjf -
Specification Data
56878-ewsb22 manufacturers standard
More from these suppliers
- 5305-00-326-3950 MPN AIC818-08-102CClose Tolerance Screw
- 5305-00-463-0246 MPN AIC813-4-R25Machine Screw
- 5305-00-505-2681 MPN LS15267V3-7Machine Screw
- 5305-01-004-9495 MPN AIC812-02-10Machine Screw
- 5305-01-188-7592 MPN LE111-0038-2408Close Tolerance Screw
- 5305-01-202-8964 MPN AIC823-22CMachine Screw
- 5305-01-298-0646 MPN AIC984B3-20Close Tolerance Screw
- 5305-01-365-7261 MPN AIC1651-3-23PClose Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-487-4740 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC220-10A14 | Sps Technologies, Llc |
EWSB22-10A14 | Sps Technologies, Llc |
VS2521-10F14 | Alcoa Global Fasteners, Inc. |
C081-10-14 | Lockheed Martin Corporation |
EWSB22-10A14 | Sps Technologies, Llc |