NSN 5306-00-490-6361
Coaxial Connector
Holes 1 and 2 90 degrees apart.
Manufacturer part number 65102-11060-102 for national stock number 5306004906361.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-490-6361.
-
MPN or Model
65102-11060-102
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.590 inches -
Fastener Length
3.650 inches -
Head Style
Round w/wrench flats chamfered -
Head Diameter
1.050 inches -
Head Height
0.230 inches -
Width Between Flats
0.865 inches -
Grip Diameter
Between 0.7486 inches and 0.7490 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
3.060 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.500 inches first hole -
Material
Steel comp 4340 -
Surface Treatment
Cadmium and chromate or cadmium and phosphate or nickel -
Surface Treatment Specification
Qq-p-416 type 2 cl 2 federal specification 1st treatment response or qq-p-416 type 3 cl 2 federal specification 2nd treatment response or 8414, fscm 78286 mfr ref 3rd treatment response -
Thread Series Designator
Unf
More from these suppliers
- 4820-00-021-4394 MPN 65651-11029-101Directional Control Linear Valve
- 1560-00-023-9440 MPN 65302-12033-001Aircraft Structural Plate
- 1560-00-066-7988 MPN S6132-80171-2Engin Platform Assy
- 1560-00-163-1971 MPN S6120-76153-002Stabilizer Fitting
- 1560-00-313-0556 MPN S14-30-5410-7Cooling System Spinner Assembly
- 1560-00-373-7070 MPN S14-30-5433Power Plant Cowl Catch
- 1560-00-421-8561 MPN 65206-03000-106Structural Assy Key
- 1560-00-439-0097 MPN 65205-03003-044Rescue Hoist Cover
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-490-6361 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65102-11060-102 | Sikorsky Aircraft Corporation |