NSN 5306-00-492-3111
Coaxial Connector
Between 0.746 inches and 0.776 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6303U7 for national stock number 5306004923111.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-492-3111.
-
MPN or Model
NAS6303U7
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.298 inches and 0.348 inches -
Fastener Length
Between 0.746 inches and 0.776 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.1890 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6303 professional/industrial association standard
More from these suppliers
- 5940-01-351-3864 MPN NAS1063A15-10SCTerminal Board
- 5940-01-449-7674 MPN NAS1063A12-N1000Terminal Board Marker Strip
- 5925-01-604-6597 MPN MS3320-5VCircuit Breaker
- 5305-00-008-7871 MPN NAS1743C08T6USocket Head Cap Screw
- 5305-00-009-7721 MPN NAS1190-4P10LSocket Head Cap Screw
- 5305-00-057-0488 MPN MS24694S1Machine Screw
- 5305-00-060-9253 MPN NAS1123-4HClose Tolerance Screw
- 5305-00-066-7369 MPN MS24693-C12Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-492-3111 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6303U7 | National Aerospace Standards |
10114290 | Nimikkeistokeskus Ncb Finland |
5306-000-0001 | Sec Commission Interarmees |