NSN 5306-00-503-5701
Close Tolerance Hex Head Bolt
Between 1.479 inches and 1.526 inches fastener length, double hexagon head style, 0.257 inches head height, width between flats: between 0.678 inches and 0.689 inches .
Manufacturer part number 68485-7A16 for national stock number 5306005035701.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-503-5701.
-
MPN or Model
68485-7A16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.479 inches and 0.526 inches -
Fastener Length
Between 1.479 inches and 1.526 inches -
Head Style
Double hexagon -
Head Height
0.257 inches -
Width Between Flats
Between 0.678 inches and 0.689 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.437 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
156000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium and chromate -
Surface Treatment Specification
Stsbs001 fscm 98897 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-158-5368 MPN SC2671-06-6Machine Screw
- 5305-01-204-4201 MPN 3M926-5L19Close Tolerance Screw
- 5305-01-658-5019 MPN BACB30LK4K6Close Tolerance Screw
- 5306-00-881-0672 MPN MS21250-050Shear Bolt
- 5306-00-882-7933 MPN 3M33-9-23AClose Tolerance Bolt
- 5306-01-054-3421 MPN C7521L6-18Shear Bolt
- 5306-01-054-3422 MPN C7521L6-19Shear Bolt
- 5306-01-134-2715 MPN VEP220121-6V19Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-503-5701 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68485-7A16 | Sps Technologies, Llc |
11701A07U016 | Reid Products Inc. |
STSBG001A07U016 | Lockheed Martin Corporation |
VAL23602-7D016 | Valley-todeco, Inc. |
AIC2264A07U016 | Sps Technologies, Llc |
PBF1042A7U016 | Sps Technologies, Llc |
VS2979A07U016 | Arconic Global Fasteners & Rings, |
BM3210-7A016 | Huck International, Inc. |
BM3210-7A016 | Huck Intl Inc |
VS2979A07U016 | Alcoa Global Fasteners, Inc. |
68485-7A16 | Sps Technologies Inc |