NSN 5306-00-503-5721
Close Tolerance Hex Head Bolt
Between 1.500 inches and 1.547 inches fastener length, double hexagon head style, 0.281 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number 68485-8A16 for national stock number 5306005035721.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-503-5721.
-
MPN or Model
68485-8A16
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.500 inches and 0.547 inches -
Fastener Length
Between 1.500 inches and 1.547 inches -
Head Style
Double hexagon -
Head Height
0.281 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
1.000 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
156000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Part Name Assigned By Controlling Agency
Navy special project -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium and chromate -
Surface Treatment Specification
Stsbs001 fscm 98897 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-354-5149 MPN ST3M455-4L7-1Close Tolerance Screw
- 5305-01-005-4022 MPN ST3M652C3-5AClose Tolerance Screw
- 5305-01-130-3260 MPN SC2671-3-8Machine Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
- 5305-01-435-6482 MPN BACB30LU9-24Close Tolerance Screw
- 5305-01-521-9174 MPN ST3M557-5-9Close Tolerance Screw
- 5306-00-403-1520 MPN VFK100G-05004Shear Bolt
- 5306-00-527-7621 MPN VFK100G-08034Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-503-5721 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68485-8A16 | Sps Technologies, Llc |
11701A08U016 | Reid Products Inc. |
STSBG001A08U016 | Lockheed Martin Corporation |
VAL23602-8D016 | Valley-todeco, Inc. |
AIC2264A08U016 | Sps Technologies, Llc |
PBF1042A8U016 | Sps Technologies, Llc |
VS2979A08U016 | Arconic Global Fasteners & Rings, |
BM3210-8A016 | Huck International, Inc. |
BM3210-8A016 | Huck Intl Inc |
VS2979A08U016 | Alcoa Global Fasteners, Inc. |
68485-8A16 | Sps Technologies Inc |
68485-8A16 | Sps Technologies, Llc |
VAL23602-8D016 | Valley-todeco, Inc. |
AIC2264A08U016 | Sps Technologies, Llc |
PBF1042A8U016 | Sps Technologies, Llc |
STSBG001A08U016 | Lockheed Martin Corporation |
68485-8A16 | Sps Technologies Inc |
VS2979A08U016 | Alcoa Global Fasteners, Inc. |
BM3210-8A016 | Huck Intl Inc |