NSN 5306-00-505-2882
Coaxial Connector
Between 6.390 inches and 6.437 inches fastener length, hexagon head style, between 0.140 inches and 0.160 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number 212-010-411-1 for national stock number 5306005052882.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-505-2882.
-
MPN or Model
212-010-411-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.4 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.452 inches and 0.499 inches -
Fastener Length
Between 6.390 inches and 6.437 inches -
Head Style
Hexagon -
Head Height
Between 0.140 inches and 0.160 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
Between 0.4982 inches and 0.4991 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole -
Single Shear Strength
18650 pounds per square inch -
Thread Diameter
0.500 inches -
Grip Length
5.938 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Distance From Head Largest Bearing Surface To Shank Hole Center
6.172 inches first hole and 6.204 inches first hole -
Material
Steel comp 4140 or steel comp e4340 or steel comp 6150 or steel comp 8735 or steel comp 8740 -
Material Specification
Mil-s-5626 military specification 1st material response or mil-s-5000 military specification 2nd material response or mil-s-8503 military specification 3rd material response or mil-s-6098 military specification 4th material response or mil-s-6049 military specification 5th material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Bps fw4312 fscm 97499 mfr ref single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-176-1087 MPN 205-030-407-473Fuselage Section
- 1560-00-431-0755 MPN 212-030-003-13Nose Assy
- 1560-00-439-0183 MPN 209-031-816-35Aircraft Structural Plate
- 1680-00-488-7647 MPN 204-076-297-1Collar
- 1560-00-488-7680 MPN 205-030-477-003Retainer Assembly
- 1560-00-497-8755 MPN 212-061-103-2Engine Mount Support
- 1560-00-653-4357 MPN 204-030-696-008Cargo Door Roller Bracket
- 1560-00-731-5518 MPN 209-050-119-5Landin Fairing Seal
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-505-2882 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
212-010-411-1 | Bell Helicopter Textron Inc. |
212-010-411-001 | Bell Helicopter Textron Inc. |