NSN 5306-00-505-3928
Coaxial Connector
Between 1.605 inches and 1.635 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS6304U20D for national stock number 5306005053928.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-505-3928.
-
MPN or Model
NAS6304U20D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.395 inches -
Fastener Length
Between 1.605 inches and 1.635 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.425 inches first hole and 1.475 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6304 professional/industrial association standard
More from these suppliers
- 5940-00-357-7565 MPN NAS1063A10-1Terminal Board Marker Strip
- 1680-01-613-6300 MPN 82872Dirt And Liquid Deflector
- 5305-00-051-2334 MPN MS51958-108Machine Screw
- 5305-00-052-6876 MPN MS24627-52Tapping Screw
- 5305-00-052-7451 MPN MS35198-99Machine Screw
- 5305-00-082-1988 MPN NAS1351C5-36Socket Head Cap Screw
- 5305-00-206-2511 MPN MS35215-57Machine Screw
- 5305-00-225-9445 MPN MS16996-34Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-505-3928 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6304U20D | National Aerospace Standards |
10114307 | Nimikkeistokeskus Ncb Finland |