NSN 5306-00-508-2832
Coaxial Connector
3.241 inches fastener length, double hexagon w/hole head style, 0.435 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number MS21250-07040 for national stock number 5306005082832.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-508-2832.
-
MPN or Model
MS21250-07040
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.731 inches and 0.751 inches -
Fastener Length
3.241 inches -
Head Style
Double hexagon w/hole -
Head Height
0.435 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Extended Washer Diameter
Between 0.740 inches and 0.750 inches -
Extended Washer Thickness
0.099 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.438 inches -
Grip Length
Between 2.490 inches and 2.510 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-027-2005 MPN ST3M652C3-7AClose Tolerance Screw
- 5305-01-435-7935 MPN BACB30LU9-34Close Tolerance Screw
- 5306-00-567-5996 MPN VAL23033-4-11Shear Bolt
- 5306-00-723-9583 MPN 3P23030-101Machine Bolt
- 5306-00-922-6433 MPN 491849Externally Relieved Body Bolt
- 5306-01-044-6526 MPN VAL23607-6D19Shoulder Bolt
- 5306-01-054-3421 MPN C7521L6-18Shear Bolt
- 5306-01-054-3423 MPN C7521L6-20Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-508-2832 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-07040 | Military Standards |
MS21250-07040 | Sps Technologies, Llc |
MS21250-07040 | Valley-todeco, Inc. |
MS21250-07040 | Arconic Global Fasteners & Rings, |
MS21250-07040 | Sps Technologies, Llc |
VFK100G-07040 | Valley-todeco, Inc. |
MS21250-07040 | Huck International, Inc. |
MS21250-07040 | Huck Intl Inc |
MS21250-07040 | Air World Mfg |
Stock Check
- NS: 93
- NE: 466