NSN 5306-00-508-6955
Close Tolerance Hex Head Bolt
Between 1.137 inches and 1.204 inches fastener length, double hexagon head style, 0.187 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number 68484-5A13 for national stock number 5306005086955.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-508-6955.
-
MPN or Model
68484-5A13
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.315 inches and 0.402 inches -
Fastener Length
Between 1.137 inches and 1.204 inches -
Head Style
Double hexagon -
Head Height
0.187 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.802 inches and 0.822 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
132000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Nickel and cadmium and chromate -
Surface Treatment Specification
Stsbs000 fscm 98897 mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-435-6306 MPN BACB30LU9-19Close Tolerance Screw
- 5305-01-435-6321 MPN BACB30LU9-22Close Tolerance Screw
- 5305-01-511-6974 MPN 3M1170D3-14AClose Tolerance Screw
- 5305-01-512-8344 MPN 3M1170C4-6AFClose Tolerance Screw
- 5306-00-630-2425 MPN BACB30NE10P11Close Tolerance Bolt
- 5306-01-045-6583 MPN VAL23607-3-27Shoulder Bolt
- 5306-01-054-3404 MPN VCG0009L6-11Shear Bolt
- 5306-01-141-7885 MPN VAL23608-6-26Shoulder Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-508-6955 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
68484-5A13 | Sps Technologies, Llc |
VS2978A05U13 | Alcoa Global Fasteners, Inc. |
STSBG000A05U13 | Lockheed Martin Corporation |
VAL23611-5D13 | Valley-todeco, Inc. |
AIC2263A05U13 | Sps Technologies, Llc |
PBF1041A5U13 | Sps Technologies, Llc |
68484-5A13 | Sps Technologies, Llc |
VS2978A05U013 | Arconic Global Fasteners & Rings, |
BM3200-5A13 | Huck International, Inc. |
11797A05U13 | Reid Products Inc. |
BM32006A13 | Aircraft Gear Corp |
BM3200-5A13 | Huck Intl Inc |