NSN 5306-00-508-7053
Coaxial Connector
Between 2.619 inches and 2.649 inches fastener length, dished hexagon head style, between 0.438 inches and 0.453 inches head height, width between flats: between 1.239 inches and 1.252 inches .
Manufacturer part number E966-30D for national stock number 5306005087053.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-508-7053.
-
MPN or Model
E966-30D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.7 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.734 inches and 0.784 inches -
Fastener Length
Between 2.619 inches and 2.649 inches -
Head Style
Dished hexagon -
Head Height
Between 0.438 inches and 0.453 inches -
Width Between Flats
Between 1.239 inches and 1.252 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.875 inches -
Grip Length
Between 1.865 inches and 1.885 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.368 inches first hole and 2.418 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-420-0670 MPN CVC241-3-12Machine Screw
- 5305-00-454-1157 MPN NAS1133V19Close Tolerance Screw
- 5305-00-508-2691 MPN LS15262V3-19Machine Screw
- 5305-00-551-4844 MPN NAS1221-3E4Machine Screw
- 5305-00-753-7287 MPN NAS1190-02P5LSocket Head Cap Screw
- 5305-00-998-6501 MPN D7500-10-B-3Panel Screw Assembly
- 5305-01-007-7064 MPN HT4041-3-2-5Close Tolerance Screw
- 5305-01-014-8453 MPN NAS1101E02-10Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-508-7053 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
E966-30D | Huck International, Inc. |
E966-30D | Huck Intl Inc |