NSN 5306-00-508-7768
Coaxial Connector
Between 0.972 inches and 1.002 inches fastener length, double hexagon extended washer head style, between 0.290 inches and 0.310 inches head height, width between flats: between 0.306 inches and 0.315 inches .
Manufacturer part number EWB0420-4-8 for national stock number 5306005087768.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-508-7768.
-
MPN or Model
EWB0420-4-8
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.487 inches -
Fastener Length
Between 0.972 inches and 1.002 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.290 inches and 0.310 inches -
Width Between Flats
Between 0.306 inches and 0.315 inches -
Extended Washer Diameter
Between 0.423 inches and 0.443 inches -
Extended Washer Thickness
Between 0.059 inches and 0.069 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
200000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-067-7811 MPN SFH22-6A18Machine Screw
- 5305-00-100-6866 MPN 106752-04-157CMachine Screw
- 5305-00-440-9994 MPN SFT22-6A6Close Tolerance Screw
- 5305-00-541-9036 MPN LS15237C3-1Close Tolerance Screw
- 5305-00-543-6054 MPN 16990-4F8DSocket Head Cap Screw
- 5305-00-816-6281 MPN NAS1152C3Close Tolerance Screw
- 5305-00-868-1927 MPN 54266-4-5Close Tolerance Screw
- 5305-00-914-3840 MPN SFH22-5A14Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-508-7768 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
EWB0420-4-8 | Sps Technologies, Llc |
EWB0420-4-8 | Sps Technologies, Llc |