NSN 5306-00-514-8109
Wheel Bolt
3.370 inches fastener length, double hexagon extended washer head style, 0.325 inches head height, width between flats: 0.576 inches .
Manufacturer part number S1610-21171-6 for national stock number 5306005148109.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-514-8109.
-
MPN or Model
S1610-21171-6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.835 inches -
Fastener Length
3.370 inches -
Head Style
Double hexagon extended washer -
Head Height
0.325 inches -
Width Between Flats
0.576 inches -
Extended Washer Diameter
0.745 inches -
Extended Washer Thickness
0.055 inches -
Thread Diameter
0.438 inches -
Grip Length
2.535 inches -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
20 -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Minimum Yield Strength
180000 pounds per square inch -
Material
Steel -
Material Specification
Mil-b-7838a military specification single material response -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-027-9377 MPN 65070-20162-041Fuselage Panel Assembly
- 1560-00-044-2415 MPN S6150-62411-000Aircraft Structural Component Support
- 1680-00-045-1359 MPN 65550-03094-041Dimming Control Unit Assembly
- 1560-00-050-1821 MPN 65307-08075-042Sponson Connector Assembly
- 4920-00-124-2459 MPN 65700-90000-044Flight Control System Test Set
- 1680-00-137-0144 MPN 65201-01030-109Cockpit Latch Guide
- 1560-00-163-4493 MPN 65201-08054-042Sponson Fitting Assembly
- 1560-00-174-8594 MPN 65200-09004-084Skin Assembly
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
![Mechanic Bill explains Wheel Bolt](/public/images/billy-thinking.png)
Pricing and Availability
Get a quote for 5306-00-514-8109 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
S1610-21171-6 | Sikorsky Aircraft Corporation |
5306H34-009-7 | U S Army Aviation And Missile |
Stock Check
![](/public/images/partscage_shelf3.png)