NSN 5306-00-515-0573
Close Tolerance Hex Head Bolt
Between 1.284 inches and 1.304 inches fastener length, double hexagon extended washer head style, between 0.328 inches and 0.348 inches head height, width between flats: 0.375 inches .
Manufacturer part number J815P039A for national stock number 5306005150573.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-515-0573.
-
MPN or Model
J815P039A
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.560 inches and 0.590 inches -
Fastener Length
Between 1.284 inches and 1.304 inches -
Head Style
Double hexagon extended washer -
Head Height
Between 0.328 inches and 0.348 inches -
Width Between Flats
0.375 inches -
Extended Washer Diameter
Between 0.490 inches and 0.510 inches -
Extended Washer Thickness
Between 0.070 inches and 0.080 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.714 inches and 0.724 inches -
Thready Qty Per Inch (tpi)
24 -
Surface Finish
32.0 microinches threads -
Material
Nickel -
Material Specification
C50tf13 cl-b fscm 07482 mfr ref single material response -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-320-6673 MPN J165P8069AInductive Wire Wound Fixed Resistor
- 4920-00-400-8269 MPN 21C1702-24Micro Filter Assy
- 1560-00-558-0656 MPN 9679M04G21Aircraft Pylon Section
- 4920-00-573-1273 MPN 21C2535G001Aircraft Engine Maintenance Fixture
- 4920-00-605-1286 MPN 1C2992-9P3Adapter Fram Sleeve
- 4920-00-865-9290 MPN 9002M32G02Shot Peening Tool Fixture
- 4920-01-003-4614 MPN 518D540P48Welded Spacer Assy
- 4920-01-006-0457 MPN 1C6107P06Core Engi Protector
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-515-0573 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
J815P039A | General Electric Company |