NSN 5306-00-515-8061
Wheel Bolt
0.562 inches fastener length, double hexagon w/hole head style, 0.260 inches head height, width between flats: between 0.243 inches and 0.251 inches .
Manufacturer part number MS9033-07 for national stock number 5306005158061.
Datasheet
-
Product description
Machine Bolt NSN 5306-00-515-8061.
-
MPN or Model
MS9033-07
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
0.562 inches -
Head Style
Double hexagon w/hole -
Head Height
0.260 inches -
Width Between Flats
Between 0.243 inches and 0.251 inches -
Extended Washer Diameter
0.375 inches -
Extended Washer Thickness
Between 0.040 inches and 0.050 inches -
Thread Diameter
0.190 inches -
Features Provided
Finished head -
Nonstandard Thread Pitch Diameter
+0.1644/+0.1667 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
248.0 brinell standard and 341.0 brinell standard -
Minimum Yield Strength
85000 pounds per square inch -
Surface Finish
63.0 microinches grip -
Material
Iron alloy 660 -
Material Specification
Ams5732 assn standard single material response -
Thread Series Designator
Unf
More from these suppliers
- 5306-00-143-3437 MPN R1393P005Machine Bolt
- 5930-00-005-3094 MPN MS27718-31Toggle Switch
- 5935-00-059-2841 MPN MS75020-1Electrical Plug Connector
- 5935-00-134-5302 MPN MS27500E18B32SAElectrical Plug Connector
- 5935-00-189-1486 MPN MS3113H20C39PElectrical Receptacle Connector
- 5935-00-237-9711 MPN MS3106B20-4SElectrical Plug Connector
- 5935-00-279-1579 MPN MS27484E24B61SElectrical Plug Connector
- 5905-00-279-3511 MPN MS35043-80Composition Fixed Resistor
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-00-515-8061 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9033-07 | Military Standards |
MS9033-07 | J.w. Manufacturing, Inc |