NSN 5306-00-526-2372
Coaxial Connector
Between 2.167 inches and 2.197 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS6304U29D for national stock number 5306005262372.
Datasheet
-
Product description
Shear Bolt NSN 5306-00-526-2372.
-
MPN or Model
NAS6304U29D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.345 inches and 0.395 inches -
Fastener Length
Between 2.167 inches and 2.197 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2490 inches and 0.2495 inches -
Shank Unthreaded Hole Diameter
0.076 inches first hole and 0.086 inches first hole -
Thread Diameter
0.250 inches -
Grip Length
Between 1.802 inches and 1.822 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.987 inches first hole and 2.037 inches first hole -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Surface Treatment
Passivate -
Thread Series Designator
Unjf -
Specification Data
80205-nas6304 professional/industrial association standard
More from these suppliers
- 5940-01-425-7404 MPN NAS1063C8-309Terminal Board Marker Strip
- 5305-00-005-0643 MPN NAS1153E16Close Tolerance Screw
- 5305-00-007-1550 MPN NAS1131E96PClose Tolerance Screw
- 5305-00-053-1094 MPN MS35199-83Machine Screw
- 5305-00-054-9251 MPN MS51045-29Setscrew
- 5305-00-115-9526 MPN MS90725-58Hexagon Head Cap Screw
- 5305-00-207-7194 MPN NAS335A14Close Tolerance Screw
- 5305-00-216-1300 MPN NAS1190C06P7LKSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-00-526-2372 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6304U29D | National Aerospace Standards |