NSN 5306-00-538-7814
Close Tolerance Hex Head Bolt
Between 0.690 inches and 0.737 inches fastener length, double hexagon head style, between 0.130 inches and 0.150 inches head height, width between flats: 0.419 inches .
Manufacturer part number HS2601-3Z6 for national stock number 5306005387814.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-00-538-7814.
-
MPN or Model
HS2601-3Z6
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.305 inches and 0.372 inches -
Fastener Length
Between 0.690 inches and 0.737 inches -
Head Style
Double hexagon -
Head Height
Between 0.130 inches and 0.150 inches -
Width Between Flats
0.419 inches -
Grip Diameter
Between 0.1885 inches and 0.1895 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.365 inches and 0.385 inches -
Thready Qty Per Inch (tpi)
32 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mac ps13145, mcdonnell douglas corporation mfr ref single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5306-00-079-6419 MPN VCD0020-4-6AShear Bolt
- 5306-00-448-7447 MPN C4356CR81010Shoulder Bolt
- 5306-00-701-2367 MPN 6846196-17Machine Bolt
- 5306-01-006-9449 MPN J644P10DMachine Bolt
- 5306-01-054-3424 MPN C7521L6-9Shear Bolt
- 5306-01-175-3625 MPN 9997M94P02Machine Bolt
- 5306-01-196-5569 MPN VFK600-7-28Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-00-538-7814 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
HS2601-3Z6 | Huck International, Inc. |
AIC261M3-6 | Sps Technologies, Llc |
66051-3-6 | Sps Technologies, Llc |
VS2938-3-6 | Alcoa Global Fasteners, Inc. |
VS2938-3-6 | Alcoa Fastening Systems |
3M261-3-6 | Valley-todeco, Inc. |
3M261-3-6 | Huck Intl Inc |
3M261-3-6 | Boeing Company, The |
HS2601-3Z6 | Huck Intl Inc |
66051-3-6 | Sps Technologies, Llc |